Case Packers
The Case Packers machine family includes wrap-around, side-load, and top-load case packers for the introduction of products in shipping cases.
Features the case packers & manipulators in this family include:
-
Modular and specular design
-
Positive case opening
-
Lateral, lower, or upper arms fitted with multiple suction cups to move the cases inside the machine
-
Increased operator access for interventions
-
Fully electronic machine
-
Low level, large-capacity, horizontal carton magazine for easy loading and adjustable at format changeover
-
Photocell control of proper carton closing
-
Outfeed photocell that counts properly closes cases
Products:
-
Cartons
-
Plastic Containers
-
Doypacks
-
Bags
-
Sachets



CP12/Cp12-TL

The CP12 Case packer and CP12-TL Top Loading Case Packer machines are monoblock case packers suitable to set-up, form, fill, and close corrugated cases. The variety of products that these machines can pack through its dedicated infeed systems are their main feature. Technical features of the CP12 and CP12-TL include the following:
-
Modular and mirror design
-
Positive case opening
-
Lower arms equipped with numerous suction cups, seamlessly handle and transfer the cases inside the machine
-
Optional addition of a lid module
-
Increased operator accessibility for interventions
-
Photocell control of proper case closing
TECHNICAL DATA:
-
Case Size: Min 250 x 150 x 200 mm
-
Case Size: Max 600 x 400 x 450 mm
-
Speed: up to 12 cpm
-
Gross Weight: 6,000 kg
-
Compressed Air: 800 Nl/min
-
Installed Power: 18 Kw
CP12-TL Demonstration Video
Top Loading Case Packer for Doypacks (Stand-up Pouches)
WA12 - Wrap Around Case Packer
The WA12 machine is a monoblock case packer suitable to set-up, form, fill, and close corrugated cases. Its main feature is the variety of products that it can pack through its custom built and designed dedicated infeed systems. Technical features of the WA 12 machine include the following:
-
Modular and mirror design
-
Positive case opening
-
Lower arms equipped with numerous suction cups, seamlessly handle and transfer the cases inside the machine
-
Possibility of adding a lid module
-
Increased operator accessibility for interventions
-
Photocell control of proper case closing
TECHNICAL DATA:
-
Case Size: Min 150 x 250 x 100 mm
-
Case Size: Max 400 x 600 x 350 mm
-
Speed: Up to 12 cpm
-
Gross Weight: 6,000 kg
-
Compressed Air: 800 Nl/min
-
Installed Power: 18 Kw

WA12 Demonstration Video
Wrap Around Case Packer for Cartons
WA12 Demonstration Video
Wrap Around Case Packer for Plastic Bottles
CP25/CP25-TL & WA25

The CP25 Case packer, CP25-TL Top Loading Case Packer, and WA25 Wrap Around Case Packer machines are monoblock case packers suitable to set-up, form, fill, and close corrugated cases. Their high capacity, vertical automatic magazine rests on the floor, and stores up to three complete stacks of blanks. In turn, this greatly reduces operator involvement. The main technical features of these machines include the following:
-
Modular and mirror design
-
Positive case opening
-
Lateral, lower, or upper arms fitted with multiple suction cups, seamlessly handle and transfer the cases inside the machine
-
Optional addition of a lid module
-
Increased operator accessibility for interventions
-
Photocell control of proper case closing
TECHNICAL DATA:
-
Case Size: Min 250 x 150 x 200 mm
-
Case Size: Max 600 x 400 x 450 mm
-
Speed: up to 25 cpm
-
Gross Weight: 8,000 kg
-
Compressed Air: 300 Nl/min
-
Installed Power: 20 Kw
CP25 Demonstration Video
Side Loading Case Packer for Cartons
CP25-TL Demonstration Video
Side Loading Case Packer for Doypacks
CP25 Demonstration Video
Side Loading Case Packer for Short-Cut Pasta
CP25 Demonstration Video
Side Loading Case Packer for Long-Cut Pasta
CP25 Demonstration Video
Side Loading Case Packer with American Case
CP 25-TL Demonstration Video
Top Loading Case Packer for Vacuum Packed Coffee Bags
SBNE
The SBNE case packing machine technical features include:
-
Double stacked horizontal magazine
-
Positive carton ejection
-
Double level carton exit
-
Closed flap detection and case reject
-
Tilt device on upper exit
-
Electrical cabinet on board
-
Single frame and very small footprint
-
Fully servo driven movements
TECHNICAL DATA:
-
Case Size: Min 350 x 210 x 220 mm
-
Case Size: Max 550 x 390 x 620 mm
-
Speed: up to 10 cpm
