Tray Packers & Display Packs
The Tray Packers and Display Packs machine family consists of automatic forming, filling, and sealing equipment; starting from flat blanks for cartons, trays, displays, and sleeves. These machines are available in two different technologies:
​
-
Form and fill—TP series
-
Wrap-around—DP Series
​
Features of the Tray Packers and Display Packs include:
​
-
Fully electronic
-
Large capacity
-
Tilted carton magazine
-
Compact footprint
-
Capability of handling irregular shaped products (both in the vertical and horizontal position)
PRODUCTS:
-
Tubes
-
Bags
-
Coffee Capsules
-
Tabs
-
Stock Cubes
-
Stick Packs
-
Cartons
-
Doypacks
-
Pouches
-
Tubs
-
Cans
-
Tins

DP25

The DP25 is a monoblock wrap around cartoner suitable to form, fill, and close cartons. This machine has a remarkably small footprint compared to its speed. The DP25 is constructed with the following main components and features:
​
-
Double infeed system
-
Continuous guide of the product to prevent damages
-
Layer configuration driven by linear servomotors with direct activation
-
Single layer checking system
-
Top and bottom controlled stratification
-
Multiple movements with single activation
-
Open flaps check system
-
Flawed cartons reject
-
Outfeed elevator
-
Easy to clean with the balcony design structure
-
Complete separation of the mechanical components to handle potentially corrosive products
-
Integrated electric enclosure
-
Product bypass in the infeed system
​
Technical Data:
​
-
Maximum Flat Blank: 225 X 325 mm
-
Speed: 20 boxes/minute
-
Gross Weight: 2,200 Kg
-
Compressed Air: 50 Nl/min at 6 bar
-
Installed Power: 18.5 Kw (DP25) + 9.6 Kw (Hot Melt Group)
DP60
The DP60 is a monoblock wrap around display/tray packer suitable to form, fill, and close cartons, displays/trays, and sleeves. The machine is constructed with the following main components and features:
-
Small and compact footprint
-
Inclined magazine able to accommodate up to four (4) flat blanks
-
Picking system with articulated arm
-
Lateral side flap gluing with hot melt injection device
-
Product insertion inside the forming tool (onto the blank)
-
Forming unit
-
Top flap gluing with hot melt injection device
-
Lid module
-
Closing station
-
Reject station
​
Technical Data:
​
-
Maximum Flat Blank: 700 x 700 mm
-
Speed: Up to 160 cpm
-
Gross Weight: 9,000 kg
-
Compressed Air: 2,000 Nl/min
-
Installed Power: 18 Kw

TP40

​
The TP40 is a monoblock “form & fill” display/tray packer suitable to handle both cartons and displays/trays. Its main feature is the variety of products that it can pack at high speeds. The machine is constructed with the following:
​
-
Single or double inclined flat blank magazine
-
Picking system with articulated arm
-
Lateral side flap gluing with hot melt injection device
-
Forming unit
-
Positive carton handling
-
Filling system through an integrated “pick & place” design
-
Top flap gluing with hot melt injection device
-
Lid module
-
Closing station
-
Reject station
​
Technical Data:
​
-
Maximum Flat Blank: 750 x 750 mm
-
Speed: Up to 120 cpm
-
Gross Weight: 14,000 kg
-
Compressed Air: 400 Nl/min
-
Installed Power: 29 Kw